Oncor Electric Delivery territory

Electricity rates in Frisco, TX

7 in 10 Texans are overpaying for electricity. What should your rate actually be?

Last updated June 2026 - Base Power Team


Quick answer

Electricity rates in Frisco, Texas

  • Typical Frisco all-in electricity rate: 18.1¢/kWh, higher than the Texas average of 16.39¢/kWh.
  • Average Frisco home electricity usage: 1,400–1,500 kWh/month in summer, well above the Texas average of 1,096 kWh.
  • Typical Frisco monthly bill: $198, compared with about $155 on Base's flat 8¢/kWh energy charge.

How do electricity charges in Frisco work?

Frisco is a power-to-choose market, so you pick your provider and their energy rate. Your bill shows two things - your energy charge, and your delivery charge. You shop for your energy charge by picking your provider. Oncor sets your delivery fee, and it stays identical regardless of which provider you select.

What's the cheapest electricity rate in Frisco?

The cheapest plan depends on your usage. When comparing plans, look at your all-in rate (energy plus delivery), as it decides your bill. Most REPs' headline rates look cheaper because they apply only in a small usage band. They may also depend on a bill credit you get only at the right kWh level.

Base has a flat 8¢/kWh energy charge. No extra fees. After covering Oncor's pass-through delivery fees, your total, all-in electricity rate comes to roughly 14.1¢/kWh. At typical use, that is about $43 below the Frisco average.

What are the best electricity rates in Frisco, TX?

Flat & clear
Typical Frisco REP
Texas average
Energy charge
per kWh
10–14¢
per kWh
10.27¢
per kWh
Oncor delivery
6.12¢
per kWh
6.12¢
per kWh
6.12¢
per kWh
All-in rate
14.1¢
per kWh
16.12–20.12¢
per kWh
16.39¢
per kWh
Avg. monthly bill
$155
per month
$177–$221
per month
$180
per month

In Frisco, you can only compare and choose the energy-charge portion. Oncor's 6.12¢/kWh delivery fee is regulator-approved and the same across every plan. So the all-in rate is what actually separates one provider from another.

A typical Frisco REP lands at 16.12–20.12¢/kWh all-in, and the Texas average is 16.39¢; Base is 14.1¢ - a flat 8¢ energy charge plus that same pass-through delivery. At the Texas-average usage of 1,096 kWh each month, that's about $177–$221 on a standard plan, compared with roughly $155 using Base.

Base's energy charge is its advertised rate; exact, usage-based pricing is in the Electricity Facts Label. See your exact rate →

What's the difference between providers in Frisco?

The biggest, most-advertised providers in Frisco are often the priciest. Tap one below to see what you could save each month by switching to Base.

Click on any provider to compare rates with Base.

Typical Frisco REP

18.1¢

all-in rate

14.1¢

all-in rate

save $43 monthly

Based on the Texas-average 1,096 kWh a month.

See how much you could save with Base Power.

Takes about two minutes.

What if I don't know how my Frisco electricity bill works?

We'll break it down for you.

What's Frisco's grid like?

Frisco is one of the fastest-growing cities in the United States — its population has climbed more than 500% in two decades to around 251,000, and it was the single fastest-growing U.S. city in 2017. Roughly 37 new homes are built per 1,000 existing each year.

That makes Frisco almost unique: nearly the entire city is new construction, which means modern roofs, modern panels, and homeowners who tend to adopt smart-home and energy tech early. Power is delivered by Oncor, the market is fully deregulated, and solar-plus-battery economics are especially strong on brand-new rooftops.

Why are my Frisco bills so high in summer?

Frisco spans Collin and Denton counties under the North Texas heat — about 20 days a year over 100°F on average. New, larger homes with lots of glass and big AC systems mean cooling drives most of the summer bill from June through September.

Air conditioning does most of the work. For the average homeowner, summer usage climbs to roughly 1,400–1,500 kWh a month, and bills can run about 30% higher than in spring.

The surrounding metro falls under the Oncor Electric Delivery territory

What can you control?

Your Frisco electricity bill isn't one charge – it's three separate businesses stacked on top of each other. Some, like your delivery charge, are identical no matter who you sign up with. But you're free to choose your retail provider – and many Texans don't realize that until they've lost savings by staying with their default provider.

Texas splits the power industry into three parts. Generation is the power plants and solar farms that make your electricity. Retail is the provider that buys that electricity and sells it to you. Delivery is the company that owns the poles and wires that carry it into your home.

Understanding which is which is the difference between chasing a headline rate and actually lowering your bill. The diagram below breaks down where each dollar goes – and shows the one area you can change.

Power generation

Power plants, wind farms, and solar panels across Texas generate the electricity and feed it onto the ERCOT grid. These generators sell electricity into a marketplace, and your retail provider bids on portions of that supply. This decides the base cost of power long before it reaches you.

Delivery (Oncor)

Your local utility owns the poles, wires, transformers, and meter that carry power the last mile to your home. All Frisco homes pay the same delivery rates. This means there's nothing to shop around for here.

Your home

Where the power finally lands – keeping your lights on, AC running, EV charging, everything plugged in. How much you use, and when, shapes your monthly bill after you've picked the right provider.

In Frisco, Oncor handles delivery, and those charges are the same no matter who you buy from.

When comparing providers, focus on all-in rates.

Well, how do I find the best provider in Frisco?

It depends on your home, your usage, and your plan. But many providers aren't transparent, so a lot of Frisco homeowners pay more than they expect.

Many plans advertise a low rate. That rate only kicks in as a "bill credit" when you use a certain amount of energy. Miss the threshold and the actual rate jumps, costing you hundreds a year.

If you know your monthly usage, you can compare the all-in cost of your current provider against others in Frisco. Doing that by hand is tough, so we built a bill comparison tool. Upload a bill, tell us your provider, or share your current rate, and we can estimate what you'd save by switching. It takes less than a minute.

Base installing whole-home backup for a Frisco home
Hey, we're Base Power

We believe energy should be affordable

Most power companies make more money when your bill goes up. Base doesn't. We support Texas communities with lower rates and a more resilient grid. We keep your energy bill low and your charges predictable. No tricks, no surprises.

Join 30,000+ Texans in accessing a flat, transparent rate.

  • One flat 8¢ per kWh energy charge
  • No bill-credit minimums and no usage fees
  • A rate below the market average, guaranteed – even at renewal

Keeping the lights on should be affordable.

Takes about two minutes.

FAQs

Oncor delivers electricity to Frisco across Collin and Denton counties and maintains the poles, wires, and meters. Frisco is power-to-choose, so you choose your retail provider separately, and Oncor's delivery charges are PUCT-approved and identical across providers.
Yes. Frisco is in Oncor's power-to-choose territory, so residents choose among many competing retail providers. Oncor still delivers the power and handles outages regardless of which provider you pick.
Base uses one flat energy rate (advertised at 8¢/kWh) plus Oncor's pass-through delivery and a flat monthly membership — no usage tiers or bill credits. For a new, all-electric home it's easy to predict. Enter your address for an exact quote and review the EFL.

Find your city

We break down electricity rates for cities across Texas. Pick yours to see how your local utility, the average bill, and Base's flat 8¢/kWh rate work where you live.

See your rate →